Part / Drawing Request
✕
More info: 230 Micro Pump™ product page
Troubleshooting
Articles
The Uni-Max® pump is cycling, but the output is inconsistent
230 Micro Pump™ not stroking
No fluid coming out of 230 Micro Pump™.
Pulse R Fault Codes.
Solenoid valve stuck open or closed.
Low-level switch does not change state.
There is fluid in the outer coax tubing.
Fluid is dripping from nozzles
Smoking tools
Too much mist/fog in the air.
more
Installation / Setup
Articles
How to wire the Pulse R with flying leads and Air Solenoid together.
How do I trim coaxial tubing?
How to retrofit an existing nozzle to fit the 230 Micro Pump™ QD Splicer.
How do I rebuild my 230 Micro Pump™?
How do I connect a nozzle to my 230 Micro Pump™ system?
How do I prime my 230 Micro Pump™ system?
What is the voltage requirement for the Pulse R?
How to install a Pulse R onto an existing system.
How do I wire my solenoid valve?
How do I shorten a coaxial output line?
Can I run lubricated air to the system?
Where to connect air to a Coolubricator, Serv-O-Spray, or Saw Blade Lube system?
Videos
▶
Nozzle Positioning For Milling
System Maintenance
Videos
▶
Replacing Coaxial Nozzles & Splicer Pins
General
Articles
What is the brass knob on my MQL system?
When do I use coiled versus straight tubing on a Single Line system?
How do I adjust the 230 Micro Pump™ output?
How do I prevent someone from turning the 230 Micro Pump™ adjustment knob?
What does the "P" mean on my 230 Micro™ Pump adjustment knob?
How do I replace a 230 Micro Pump™?
What the numbers on a 230 Micro Pump™?
How to change modes on a Pulse R.
Timing with multiple Pulse R's at the same rate.
Pulse R Display Units.
When to use 1 versus 2 spray nozzles.
What fluids and components should be kept out of Unist systems?
What is the mesh screen size on a 16, 32, or 64 oz fluid reservoir?
What are my options for reservoirs larger than 64 oz?
How short can a nozzle be made?
Why is there a hole in the splicer pin?
Videos
▶
Flexible Plastic Nozzle Tip Product Improvement
▶
Capillary Splicer Product Improvement
Not finding what you need?